Custom Search
Reaper Trinity Core Installation Guide
Posted by Reaper-X Jan 1 2009 3:50 am
Special Thanks to Wrath for creating this Reaper-X TrinityCore Installation Instruction, and that means full credits should be given to him ;)
First Things first!!! Pay attention to the instuctions directly do not vear off and think you know what your doing because you wouldnt be reading this if you knew what you was doing…jking but still stay to the instructions.
1. Install wow 2.4.3 and make sure you have the correct version I repeat 2.4.3. ok now off to the good stuff.
2. Download and install MYSQL follow the instructions that are provided for you on the page. Even if you have installed mysql before reread the instuctions and follow to a T.
3. After you have finished installing mysql download and install .net framework 3.5 SP1. This is also provided for you on the web page. If you have previous installations of MYSQL uninstall it and delete any sql folders left over and then reinstall.
4. Now download the Trinity Core 595 SD2 809 (Trinity/UDB ONLY) FULL | 18.0 MB | Rapidshare (or from any mirror you choose) and then extract it. I usually extract it to the desktop. you can extract it by double clicking on the file.
5.After you get the mysql loaded and configured there are some changes that you have to make. go to your desktop folder called Reaper-X Trinity Rev 1 and then open it. then open the folder labeled install database.Now right click on the Install Reaper-X Trinity.bat file and edit it in notepad. you must add qotes as seen below.. Also you must make sure that the correct path is typed for where the bin file is located.What you see below is my path make sure you type your path.After your done editing this file save and close it.
REM ####################################################
REM # MySQL HOST PATH - MySQL Server Path
REM # EXAMPLE: C:\Program Files\MySQL Community 5.0\bin
REM ####################################################
set mysqlpath="c:\Program Files\mysql\MySQLServer5.0\bin" <--notice the qoutes in the path.
6. Now open the Reaper-X Trinity Rev 1 folder that is located on your desktop. Hang in there were getting to the good parts.
7. You should see a bunch of files and 4 folders when you open it up.
8. The first thing we want to do when we get this folder open is fill the folder that says data with the correct stuff. If you open the data folder up you will see three folders. DBC ,maps and Vmaps. DBC is already filled with the correct stuff, dont touch, delete or anything right now. If you open maps and Vmaps the folders are empty and that is ok. We are going to fill them with the correct data.
9. Close out of the Data windows that you have open so that you are back at your desktop and reopen the Reaper-X Trinity Rev 1 folder.Now open the extractors folder. You should see a folder and a file. Folder named vmap extractor and assembler. and a file named map and DBC extractor.exe.
10. Open the vmap extractor and assembler folder and you should see 4 files in there. Copy all 4 files and then paste them into your c:\program files\world of warcraft\data\enus directory and then run the RUN ME FOR VMAPS!.bat file. This will create the VMAPS folder. this may take a while so just wait till it tells you it is done.
11. Ok after Vmaps are created copy the folder name vmaps that has now been created, into the Reaper-X Trinity Rev 1 folder under the data folder. This is where the three folders are that I talked about earlier (maps,vmaps,dbc). copy all the contents from vmaps into the folder named vmaps in there. So now you should have a filled dbc folder and a filled vmaps folder in there. the maps folder is empty still but we are going to add data in a minute in there also.
12. Ok now we need to put data into the map folder so the way to do that is go to Reaper-X Trinity Rev 1 (on your dekstop) folder again and go to extractors. copy the map and dbc extractor.exe file to the c:\program files\world of warcraft folder and paste it there. now run the maps and dbc extractor.exe file. This will start to install the maps to a folder called maps. see how easy that is. Once it is done you now need to open the maps folder it created and copy the contents or data, and then paste it into the folder called maps located in the Reaper-X Trinity Rev 1\data\maps folder (you know the folder on your dekstop). now the DBC, VMAPS and MAPS folder all have data in them. YAY!!!
13. Now you need to move those folders to the correct location. Go to your c:\drive and make a folder there on the root called WOW. now open the wow folder you just created and make another folder in there called DATA. Now open the DATA folder you just created. Now go to your desktop and inside your Reaper-X Trinity Rev 1 folder open the data folder. You should see the three folders in there (maps,vmaps and DBC) copy all three folders into the DATA folder we just created previously. so when done you should have 3 folders in you c:\wow\data path. maps,vmaps and DBC should be in there.
14. Now you need to run the Install Reaper-X Trinity.bat file(located in the Reaper-X Trinity Rev 1 folder on your desktop under the install database folder. Run this file and it will take a while for this too run.
15. once it is done it should close on its own if not hit any key and it should close.
16. Now you need to download Navicat program. this will allow you to edit the sql files. after downloading Navicat make a new connection and name it whatever you want.username should be root or whatever you made it when you set SQl up. Put your password in whatever you made the password.Click test and it should be sucessful. Now open the realmd tables and then go to realmlist. once you open realmlist you will see a table probably empty and this is where you need to add your realm name. Put your realm name where it says realm name and then put your IP address where it says ip address(127.0.0.1). The ID should be 1. close Navicat out.
17. Now go back to your desktop and open the trinityrealm.exe file and you should see your realm listed in there.
18. Now open click on the trinitycore.exe file and it should start scripting, let it run.
19. Once it is finished you now need to create an account so you can play. Hit enter to get a command prompt. Type account create (login name anything you want) (your password). Hit enter it should say account created.
20. Now if you want Gm power in which im sure you do type account set gm (username) 3 and hit enter. should have a GM account now.
21. Now you need to create the TBC (The burning Crusade) addon so you can play in the Burning Crusade area. Type account set addon (Your username) 1.
22. Navigate to c:\program files\world of warcraft. Look for the realmlist.wtf file. right click on it and click on edit. Should open a notepad. Now take everything out of there and type “set realmlist 127.0.0.1″ without the quotes. Save and close.
22. You can now open Wow and type your username and Password and login to your realm and play as a GM.
Trackbacks/Pingbacks
Leave a response
Connect with me
Yes Thank you The Darkened Linux.
I have went to http://trinitycore.org and found a step by step guide to getting my server online to share with my bro. I had it all configured and working, I could log in from the host pc so I know the basics were fine. All necessary ports were forwarded and I had a dns. Everything was running fine last night, but when he goes to log in today he was unable to connect to my server. After some exhaustive troubleshooting, I found that my ip address had changed, so my dns name was pointing to my old ip address…? So I updated the dns host site and gave them the new ip and thought everything would be ok now but no. I have been unable to connect now from a pc in my LAN.
I decided to scrap everything and start this install from scratch.
Guess I will have to create a static ip first this time.
I was so close.
Hey is your user name the same on trinity forums? I have account there in case I get get it this time around.
To Hustler539
Ok if you are going to connect over the internet you will need to port forward, but if you are connecting to a computer on the same network you dont need to port forward.
1) You will need to create a static Ip, Google “Staic ip” and you will find it.
2) Then in your MySQL database you will need to add you Static ip into the Realmd table. just look at what Reaper-x did, it will be the same.
You will need a programe for that, like http://www.navicat.com or any MySQL manager.
3) Then you need to add your Staic ip number into the realm.wtf file in World Of Warcraft.
For more info goto http://trinitycore.org and Search your question, because Reaper-x code is based off of Trinitycore code.
everytime I run the Reaper-X Trinity.bat it blinks on then off. when I run it through command prompt to see what happened it says: “Files\MySQL\MySQL was unexpected at this time
First off I wanna say thank you to Reaper-X and everyone who worked hard to bring us this. I followed the instructions on this site and everything worked well:)
However I have a question. I would like to be able to let my bro join in my server so I would like to forward(open?) some ports. What ports does Trinity realm and world use?
I have router for internet use for me and my brother, so he is on same LAN. I referred to the guide on here but it seems a bit outdated and this is a different core. They mention port 3724 for realm and port 8085 for world, would they still be the same for Trinity?
If you go to http://www.trinitycore.org/ and ask you will get a REAL Solution! No one can help you because this website is dead.
[The Darkened Linux]
i asked for solution, but all you can do is spam. can any1 help?
P.S. i get Disconnect on realm selection.
here’s printscreen to my trinityrealm/trinitycore
[img]http://img204.imageshack.us/img204/7117/14438872.jpg[/img]
I have problem that is posted here before, but nobody posted the solution. Trinitycore and trinityrealm starts fine, but when I login, I get Disconnected on realm name. Please help!
Well all has gone well till i get to 14. i now get this
mysql: option ‘-D’ requires an argument
mysql: option ‘-D’ requires an argument
This may take a while…
Press any key to continue . . .
[IMPORTING] Please Wait…
mysql: option ‘-D’ requires an argument
Done Installing Databases
[IMPORTING] Installing Some Housekeeping…
mysql: option ‘-D’ requires an argument
mysql: option ‘-D’ requires an argument
mysql: option ‘-D’ requires an argument
Housekeepping Finished!
Press any key to continue
—————————
As in post 164. Thing is im new to mysql and navicat so i have no idea how toimport files toopen them. Is tere anyone that can help me please. I have been working on this thing for 3 days now and am not going anywhere now…
PLEASE HELP… =(
can ya help me with this?
Map & DBC Extractor
===================
Detected locale: enGB
Opening ./Data/enGB/locale-enGB.MPQ
Opening ./Data/enGB/patch-enGB.MPQ
Opening ./Data/enGB/patch-enGB-2.MPQ
Extracting dbc files…
Extracted 185 DBC files
Using locale: enGB
Opening ./Data/enGB/locale-enGB.MPQ
Opening ./Data/enGB/patch-enGB.MPQ
Opening ./Data/enGB/patch-enGB-2.MPQ
Opening ./Data/common.MPQ
Opening ./Data/expansion.MPQ
Opening ./Data/patch.MPQ
Opening ./Data/patch-2.MPQ
Extracting maps…
Read Map.dbc file… Done! (83 maps loaded)
Read AreaTable.dbc file… Done! (1643 areas loaded)
Unhandled map chunk: 3408248……41%
Hey all, a few of us have gotten together and started a new website to continue support for Trinity Core. Everyone is welcome to join and contribute, or just poke around and maybe we can all learn and get better. Reaper, if you ever do come back, let me know and we could work together in the future. Here is the web address:
http://forum.cycnusmedia.com
when i have done everyhing that you said, i doubled clicked RUN ME FOR VMAPS and the end it says finished with errors, can you please help me
Doz
When you run it file, it will say in ( )
what it is most likely.
fill them in as username root
password what ever your sql password is
world as world
characters as characters
Hi there
Make sure you created an account.
You can view accounts in your navicat lite.
Make sure your account is there.
I would also try making a new one. hi password hi
If that doesnt work check your wow realmlist
make sure its set to
set realmlist 127.0.0.1
Check your wow version, make sure your running the right one.
double check your
LoginDatabaseInfo
WorldDatabaseInfo
CharacterDatabaseInfo
DataDir
vmap.enableLOS = 0
vmap.enableHeight = 0
See if your firewall is stopping you from logging on.
last thing you could do is install hamachi and see if that helps. Steps are above.
Hello Everyone,
I have followed the instructions for trinity Rev1 and when I try to log into my private server, I get “Unable to Connect”. It’s not taking any logon information. I’ve checked all files and everything is set to 127.0.0.1.
Can someone please help………
Thanks..
those are your MySQL login and pass
Ok nice guide but i got “stuck” at 14. When i launch “Instal Reaper-X Trinity.bat” i push one and hit enter.. Then it ask for some kind of Database Username and password where do i get them :\ plz help
Hamachi , bypasses all your firewalls and portforwarding. so you dont need to change anything when you try to make a server online.
aka. makes things alittle easy to get going with friends.
what is hamachi?? for building a trinity server just i need the “CycnusMedia 2012 Repack”?? sorry and thanks
Alittle more info for yha.
Download hamachi here.
https://secure.logmein.com/products/hamachi/vpn.asp?lang=en
After you install it. It will teach you how to use it. You will need to turn it on. (the bottom left button). Next you will need to click on the bottom to the right. It will say create or join. You need to create. Once you pick a name and a password you should be done. Your friends will need to install this too. But have them join your account. the one you just made. Once thats done you guys can play wow together.
Hi there.
Hey jeff, i would switch over to use hamachi. When you install it, just use the number at the top of your hamachi program (aka thats your new ip). leave everything as 127.0.0.1 in your conf files. The only thing you need to change is your Wow realmlist. change it to your new ip. (aka the one in the hamachi program your going to download). so it sould look like this in your wow realmlist. set realmlist 127.0.0.1
But use your number not the 127.0.0.1.
After that, just make sure all your other peeps are using your new number too.
hello i i using trinity core and i set up a public server i can connect and other people can connect using my dns name 1 problem thay can only get in to the world and play if no 1 from my house has connected yet as soon as some logs in and gets in to the world eny 1 out sode of my house gets disconnected and sent back to the realm screen and cant get back into the relm intill i reset the server .. how do i make it were people wont get disconnected from the server wen some 1 from my house logs in and starts playing
Can someone make a Linux guide for the Trinity Server. Reaper-x you should jump on it, you could be one of the 1st to put out a World of Warcraft Linux Server. If you can, Ubuntu would be the best place to start.
Thx!
ok got everything working properly except one thing, i connect in to my realm but can never get to the point of creating a character it just sits there and keeps trying to connect to the realm again. any idea why this is?
ok i fixed the cannot connect i dident have the server.exe open at the same time as the core.exe but now it ses i have invalid password or user name can eny 1 help iv red every post and dident see eny on this problem
ok i did every it told me to do and and i figured out every thing elts from the post’s above but wen i try to login it ses unable to connect what can i do every thing elts works
I’m stuck on step 10, extracting the vmaps. It keeps stopping at:
Processing map 29 46 AhnQiraj…
I have let is sit for more than 8 hours. Has anyone had this problem?
I am trying to setup Trinity with Client version 2.4.3
looking for that maps file :} can u help me if u got it fixed?
I’ve tried everything!!!!!!
For some reason I just can’t get this thing to update, I’ve used the update packs that TrinityCore has released, I’ve used the packs that Trinity DataBase has released, I’ve even tried a combination of both. Nothing works. I’m gonna spend the next couple of days working on my website.
Here’s a copy of the repack without a Reaper-X upgrade option. (If anyone can figure out how to get the Reaper-X version to upgrade to 3.0.9 let me know so I can include the updates in my repacks, Thx)
CycnusMedia 2012 Repack
http://rapidshare.com/files/211775318/Cycnus_Media_Repack_2012.zip
Cycnus Jones
This guide is definatly the best one out there i only ran into a few problems and thanks for the people in the comments for helping with them and thanks to Wrath for making the guide and thanks to Reaper-X for posting the guide
Sorry suprphrk I forgot to post here that I removed it because of some errors in the database installation process yet again. I’m working on fixing those and should have it up again soon. I post when it’s up.
Cycnus Jones
When trying to access Cycnus’ repack.
Here is the update Repack 2012 that includes the new Database Installation folder for anyone who has not download the repack previously.
http://rapidshare.com/files/211521412/Cycnus_Media_Repack_2012.zip
Cycnus Jones
Sorry guys, to everyone that downloaded my repack 2012 and are trying to update Reaper-X Trinity to Cycnus Media Trinity, there were some key patches left out of the update process which were causing some errors and subsequently the update was not performed properly. I have fixed the issues and have uploaded a new repack file (I removed the old file to stop any confusion before it happens), along with the Database Installation folder on its own as a separate file for those of you who have already downloaded the previous repack.
Here is the Database Installation folder : (Replace the current folder with this one, it contains everything needed for all installs)
http://rapidshare.com/files/211515882/Database_Installation.zip
Hope this helps, and if anyone has any problems let me know.
Cycnus Jones
3.0.9 but you can update your reaper-x 2.4.3 and maintain your characters into this version with the supplied database installation tool.
Hmm? Is this repack for 3.0.9 or 2.3.4?
Okay guys, here is my latest repack. It contains version 2012, the latest core and database. It is stable and has quite a few fixes since the last one I put up here.
http://rapidshare.com/files/210957707/Cycnus_Media_Repack_2012.zip
For those who downloaded my last repack, the maps, vmaps, and dbc’s from your version are fine, they do not need to be re-extracted. To upgrade your database to the current version just run the database installation tool and select 2 to upgrade Cycnus Media Trinity.
If you have the Reaper-X Trinity Rev.1 for 2.4.3, you can update using this repack. When you run the database installation tool, select 3 to upgrade Reaper-X Trinity. This will update your databases to the 3.0.9 database and patch it to the current version. You will need to extract the maps and vmaps using the tools in the Extractors Folder.
If you have any questions post them and I will try to help as best I can.
yes the link i give has everything there.
install the world DB using TDB 0.0.3 and find the clean install of characters.sql and realmd.sql on separate folder.
install is the same, just restore using sqldump
remember when compiling TC2 (using visual studio 2008/express) to change into release version, after that copy all the release folder in the VC9 folder into TC2 Main folder.
WARNING, LOTS OF BUG, and BROKEN QUEST, especially DEATH KNIGHT and NORTHREND are plaguing the database.wait until new update comes up
(ps:sorry for double post…my internet is so slow…-malaysia- )
Awesome, glad to hear it. Will the db scripts given above update characters from the Trinity Core 595 SD2 809 to TC2?
for anyone using 3.0.9 client, use the TRINITY CORE 2 and 0.0.3 TDB
(question about compiling, error, sql, etc, you can email to me at lordalexandrite@gmail.com) or just go to the trinitycore forum…
for TC2 get the zip file and start compiling
for database
use Here
for anyone using 3.0.9 client, use the TRINITY CORE 2 and 0.0.3 TDB
(question about compiling, error, sql, etc, you can email to me at lordalexandrite@gmail.com) or just go to the trinitycore forum…
for TC2 get the zip file and start compiling
for database
use http://svn.assembla.com/svn/trinitydatabase/trunk/
Fixed my problem and so far all is working great. Able to play the game. My problem was in navicat I had changed the port to 3306 rather then leaving it alone. Changed it back and that solved my problem. Many thanks for easy to follow instructions. Highly appreciated.
Great instructions, but having a problem with characters. Tells me i’m connected but there are no characters then i get disconnected. Stuck on this, not sure how to fix. Can anyone help. Thanks
hi, can you please post how you fixed your “does not connect” problem? :)
thank you,
Everyone, go in to http://worldofweiss.selfip.com ,register!
Realmlist is Worldofweiss.selfip.com
Pls try my server, got it working today. :)
when i’m running trinitycore i get the error that it cant find 0013339.map
i checked and its indeed not there, i re-extracted the maps, its not there.. can some1 please please PLEASE help me out on this, oh and yes i have TBC installed and WOTLK installed 3.0.9
any suggestions?
@negrodamus
I dont think there are any switched needed other than you need to edit the magos.conf file to where the data path is. Ex. mine is c:\data\wow and your should be d:\ or e:\ or whatever you drive letter and path to the maps. DBC and Vmaps files are. Thanks Wrath
Only problem I have is
vmap_assembler.exe and vmapextract_v2.exe are trying to extract my vmaps from C:\Program Files\World of Warcraft\Data
I dont use that for my Private Realm data, in fact I dont use my C:\ drive for anything
So are there any switches I can run so that those 2 exex can point to where I have my 2.4.3 installation at?
This guide was very easy to follow and I encountered very few problems. Thank you.
I did notice that the GMIsland is empty. How do I add the NPCs for GMIsland?
stupid me…i just had to run the trinityrealm and everything works fine -.-”