Reaper Mangos 5472 – Easy WoW Private Server for World of Warcraft 2.3.3

1. 

   cobalt said Apr 2, 2008 at 12:35 am

   

   I’m having a problem creating a public server for friends. when they connect to the server it loops on the realm list. meaning it shows my realm and after you choose it the realm list appears again. any ideas what i may or may not have done?

   Link to this comment Reply to this comment

   
   
2. 

   borisboofhead said Apr 1, 2008 at 10:20 pm

   

   thanks a lot social codeo im going to try the guild thing it sounds good but it happens with every new character i make i still dont no wat it is. as soon as they die i just delete them cause i cant res. oh yeh also with taurens they die straight away after the intro has finished playing so i cant play with taurens :S

   Link to this comment Reply to this comment

   
   
3. 

   SocialCode said Apr 1, 2008 at 8:15 pm

   

   @laser_guided_brick
   make sure you have the .NET framework installed. Also try dumping your databases (Mangos, Characters, Scriptdev2, realmd etc) and doing a clean install of 5472. See if it resolves the problem without any character account data in.

   @Craig318
   the I field is the old field for The password hash – the new one is a field titled sha_pass_hash You can either rename that field or do what i did Create a new field completely and run both a (legacy) 5225 server and a 5472 server

   @borisboofhead
   I had a similar problem with a horde character a while back. The only solution i found was to dump the character unfortunatly. (as a tip – always create yourself a guild or join party the reason being the .revive command will always work in these chat systems – even when your dead)

   Link to this comment Reply to this comment

   
   
4. 

   Hip-Hop said Apr 1, 2008 at 3:27 pm

   

   Yeah as always GOOD JOB! But I have an other question. When is the Mangos for version 2.4.0 coming up? I must say the 2.4.0 version will be very good – new island, new quests and new items, I can’t wait!

   Link to this comment Reply to this comment

   
   
5. 

   Johann said Apr 1, 2008 at 11:44 am

   

   Derek – the scripting doesn’t work for just about every escort quest, timed spawn, etc. It’s not the real game, accept it or pay for it. If you use the PSDB though, there are many workarounds incorporated.

   Link to this comment Reply to this comment

   
   
6. 

   Brent said Apr 1, 2008 at 10:02 am

   

   Portal to Stormwind
   .addgo 176296

   Portal to Darnassus
   .addgo 176498

   Portal to Ironforge
   .addgo 176497

   Portal to Orgrimmar
   .addgo 176499

   Portal to Thunder Bluff
   .addgo 176500

   Portal to Undercity
   .addgo 176501

   Portal to Maraudon
   .addgo 178404

   Portal to Exodar
   .addgo 182351

   Portal to Silvermoon
   .addgo 182352

   I dont know how to program custom portals…
   But those are the commands for portals to main cities + mara

   Link to this comment Reply to this comment

   
   
7. 

   Craig318 said Apr 1, 2008 at 8:05 am

   

   ERROR 1054 (42S22) at line 1: Unknown column ‘I’ in ‘account’

   Got that when i was upgrading…

   Link to this comment Reply to this comment

   
   
8. 

   Derek said Apr 1, 2008 at 6:53 am

   

   Anyone else having problems with escort quests or any quests where an event should be triggered upon accepting?

   Nobody answered my question regarding the “locales_***” files either. Does anyone know why they’re empty? Are they supposed to be? How can I fix them?

   I’ve tried re-extracting Vmaps, Maps and DBC, but it didn’t do anything.

   Link to this comment Reply to this comment

   
   
9. 

   zoo said Apr 1, 2008 at 4:45 am

   

   erm, how about creature spawn time? how do i change the creature spawn time? means after i kill the creature, i want it to respawn after 1 minutes times. can u teach me how to do this?

   Link to this comment Reply to this comment

   
   
10. 

    borisboofhead said Mar 31, 2008 at 11:10 pm

    

    right thsi is really weird i did everything u said and yeh the server is working fine i no how to use mangos and stuff so ive created account ceated character and set as lvl 3 gm. now when i go into play it works fine but when i start doing some dm things quite a lot of the time i just die on the spot and if i click ressurect nothing happens. the ” ressurect” banner dissapears but i jsut lay there dead. cant use any gm spells eaither and if i log back in im still dead. so i need to delete the char and start again.

    for example i was running into uldaman and id been playing on this char for about 3 minutes and he just falls over and dies no reason wat so ever. he was level 255 so nothing could have killed him. any suggestions/comments plz help me :( ??????

    Link to this comment Reply to this comment

    
    
11. 

    laser_guided_brick said Mar 31, 2008 at 3:34 pm

    

    Hi Reaper,
    little prob I’m having with my home server if anyone can help..
    Running Server 2003 SP2 installed 5427 from scratch all went well no errors… but when I start mangosd.exe,realmd.exe files they start and then sit there for about 5-10 secs then seem to bail. no messages no errors just a blinking cursor in each one then gone…
    ???
    Any ideas?

    Link to this comment Reply to this comment

    
    
12. 

    hellchief said Mar 31, 2008 at 10:41 am

    

    anybody could help out how to make custom portal

    Link to this comment Reply to this comment

    
    
13. 

    Brent said Mar 31, 2008 at 9:43 am

    

    Hey Reaper are you working on a 2.4 version yet?

    Link to this comment Reply to this comment

    
    
14. 

    ActivEcks said Mar 31, 2008 at 7:03 am

    

    @ martian

    I went ahead and done each upgrade chronologically. The only thing I had to do was download the new DBC’s. Appearantly no map changes or anything between 5082 and 5472. I was hoping it would solve my problem (pet constantly gaining and losing roughly 50-100 xp every 2 seconds). Does that even standing at the auction house… Its still occuring in 5472.

    Also, From what I saw in 5082, aggro spells and anti-aggro spells didn’t work very well, if at all, is that implemented yet?

    Again, Hunter spell “Volley” in 5082 would just do the AoE around the character and not the target locator placed on the ground. I haven’t tested this as I am currently writing from my laptop and had to leave the house for a little while.

    Link to this comment Reply to this comment

    
    
15. 

    bonehead said Mar 31, 2008 at 6:32 am

    

    realmd.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

    I don’t know anymore… deleted everything, re-installed everything, rebuilt everything… like I said, it did this with ver 4116, but worked fine for 5000 vers, but it just won’t run the dang realmd.exe and mangosd.exe programs on this version (5472)… I’m kinda at a loss here. I even tried all three linked downloads thinking maybe some were corrupt or something. Dropped back down to 5225, and that still works fine. Lemme know if anyone else is having this problem. :[

    Link to this comment Reply to this comment

    
    
16. 

    Shinzon said Mar 31, 2008 at 5:59 am

    

    Informative – Thank you so much for your comments. I couldn’t agree more.

    Link to this comment Reply to this comment

    
    
17. 

    martian said Mar 31, 2008 at 4:30 am

    

    @ ActivEcks

    You should be able to just upgrade from 5082 to 5472. May have character problems as I did they changed one of the file names and how to fix that issue is above.

    Good luck ActivEcks,

    mArTiAn

    Link to this comment Reply to this comment

    
    
18. 

    ActivEcks said Mar 31, 2008 at 4:19 am

    

    Forgot to mention, using Wow version 2,3,3,,7799 with build 5082. I have downloaded the upgrades ahead of 5082. (5116, 5225, and 5472). I guess im just going to do the update from each one, then rebuild files at the end. No sure what changes are being made to know if I need to rebuild Vmaps or anything like that but I guess I will anyways.

    Link to this comment Reply to this comment

    
    
19. 

    martian said Mar 31, 2008 at 4:11 am

    

    @ Jack

    Why do you have your IP set as no IP in realmlist and Mangos for? It should be as follows:

    Wow realmlist:

    set realmlist 127.0.0.1

    That is all…

    Mangosd.config:
    (look for the following in the code)

    LoginDatabaseInfo = “127.0.0.1;3306;yoursqlusername;yoursqlpassword;realmd”
    WorldDatabaseInfo = “127.0.0.1;3306;yoursqlusername;yoursqlpassword;mangos”
    CharacterDatabaseInfo = “127.0.0.1;3306;yoursqlusername;yoursqlpassword;characters”

    realmd.config:
    (look for the following in the code)

    LoginDatabaseInfo = “127.0.0.1;3306;yoursqlusername;yoursqlpassword;realmd”

    scriptdev2.config:
    (look for the following in the code)

    ScriptDev2DatabaseInfo = “127.0.0.1;3306;yoursqlusername;yoursqlpassword;scriptdev2″

    Link to this comment Reply to this comment

    
    
20. 

    Glubbdubdribian said Mar 31, 2008 at 4:10 am

    

    Hi, this looks really cool but does anybody know when the version of mangos for patch 2.4.0 will be out? Thankyou in advance.

    Link to this comment Reply to this comment

    
    
21. 

    ActivEcks said Mar 31, 2008 at 3:43 am

    

    Reaper, thanks for such time and effort put into this. my question is, I believe I am using 5082 of your build. (says so when first launch mangosd.exe. Can I upgrade directly to this or do i need to do updates in chronological order?

    Link to this comment Reply to this comment

    
    
22. 

    Lyo said Mar 31, 2008 at 3:41 am

    

    Great release, much more stable than my last server!
    I’m having a similar issue with my auction bot, it seems there is only 1 item in the auction house at a time, how do I correct this… I can’t seem to figure out what i’m missing. Thanks for the help in advance :)

    Link to this comment Reply to this comment

    
    
23. 

    informative said Mar 30, 2008 at 10:00 pm

    

    Line 32 through 34 says this

    (32) LOCK TABLES `creature_template` WRITE;
    (34) REPLACE INTO `creature_template` VALUES

    Seems odd that it would have trouble locking a table, but perhaps the error doesn’t occur until the replace but it is still citing the lock table command as the first command in the command set? Like begins transaction end transaction might? You might reboot and ensure nobody and nothing is connecting to the database- All of this assumes you’ve already verified your table structures match the above. If they didn’t match you missed something else.

    Link to this comment Reply to this comment

    
    
24. 

    informative said Mar 30, 2008 at 9:50 pm

    

    If this helps any here is the AQLYOG table structure dmup for those three tables that are affected by that custom vendors SQL. I tested the script and it works with my database of course I had to change the INSERT statements to REPLACE statements because I had already run it once. If you can dump your structure and compare it to this, you should see what is different and needs update on your tables.

    /*Table structure for table `creature` */

    DROP TABLE IF EXISTS `creature`;

    CREATE TABLE `creature` (
    `guid` int(11) unsigned NOT NULL auto_increment COMMENT ‘Global Unique Identifier’,
    `id` int(11) unsigned NOT NULL default ‘0′ COMMENT ‘Creature Identifier’,
    `map` int(11) unsigned NOT NULL default ‘0′ COMMENT ‘Map Identifier’,
    `modelid` int(11) unsigned default ‘0′,
    `equipment_id` int(11) NOT NULL default ‘0′,
    `position_x` float NOT NULL default ‘0′,
    `position_y` float NOT NULL default ‘0′,
    `position_z` float NOT NULL default ‘0′,
    `orientation` float NOT NULL default ‘0′,
    `spawntimesecs` int(11) unsigned NOT NULL default ‘120′,
    `spawndist` float NOT NULL default ‘5′,
    `currentwaypoint` int(11) unsigned NOT NULL default ‘0′,
    `spawn_position_x` float NOT NULL default ‘0′,
    `spawn_position_y` float NOT NULL default ‘0′,
    `spawn_position_z` float NOT NULL default ‘0′,
    `spawn_orientation` float NOT NULL default ‘0′,
    `curhealth` int(11) unsigned NOT NULL default ‘1′,
    `curmana` int(11) unsigned NOT NULL default ‘0′,
    `DeathState` tinyint(3) unsigned NOT NULL default ‘0′,
    `MovementType` tinyint(3) unsigned NOT NULL default ‘0′,
    PRIMARY KEY (`guid`),
    KEY `idx_map` (`map`),
    KEY `index_id` (`id`)
    ) ENGINE=MyISAM AUTO_INCREMENT=291115506 DEFAULT CHARSET=utf8 ROW_FORMAT=DYNAMIC COMMENT=’Creature System’;

    /*Table structure for table `creature_template` */

    DROP TABLE IF EXISTS `creature_template`;

    CREATE TABLE `creature_template` (
    `entry` int(11) unsigned NOT NULL default ‘0′,
    `modelid_A` int(11) unsigned NOT NULL default ‘0′,
    `modelid_A2` int(10) unsigned NOT NULL default ‘0′,
    `modelid_H` int(11) unsigned NOT NULL default ‘0′,
    `modelid_H2` int(10) unsigned NOT NULL default ‘0′,
    `name` varchar(100) NOT NULL default ‘0′,
    `subname` varchar(100) default NULL,
    `IconName` char(100) default NULL,
    `minlevel` tinyint(3) unsigned default ‘1′,
    `maxlevel` tinyint(3) unsigned default ‘1′,
    `minhealth` int(5) unsigned default ‘0′,
    `maxhealth` int(5) unsigned default ‘0′,
    `minmana` int(5) unsigned default ‘0′,
    `maxmana` int(5) unsigned default ‘0′,
    `armor` int(10) unsigned NOT NULL default ‘0′,
    `faction_A` int(4) unsigned NOT NULL default ‘0′,
    `faction_H` int(4) unsigned NOT NULL default ‘0′,
    `npcflag` int(4) unsigned default ‘0′,
    `speed` float default ‘0′,
    `scale` float default ‘0′,
    `rank` tinyint(3) unsigned default ‘0′,
    `mindmg` float default ‘0′,
    `maxdmg` float default ‘0′,
    `dmgschool` tinyint(1) NOT NULL default ‘0′,
    `attackpower` int(10) unsigned NOT NULL default ‘0′,
    `baseattacktime` int(4) unsigned default ‘0′,
    `rangeattacktime` int(4) unsigned default ‘0′,
    `flags` int(11) unsigned default ‘0′,
    `dynamicflags` int(11) unsigned default ‘0′,
    `family` int(11) default ‘0′,
    `trainer_type` tinyint(3) default ‘0′,
    `trainer_spell` int(11) unsigned default ‘0′,
    `class` tinyint(3) unsigned default ‘0′,
    `race` tinyint(3) unsigned default ‘0′,
    `minrangedmg` float NOT NULL default ‘0′,
    `maxrangedmg` float NOT NULL default ‘0′,
    `rangedattackpower` smallint(5) unsigned NOT NULL default ‘0′,
    `type` tinyint(3) unsigned default ‘0′,
    `civilian` tinyint(3) unsigned NOT NULL default ‘0′,
    `flag1` int(11) unsigned default ‘0′,
    `lootid` int(10) unsigned NOT NULL default ‘0′,
    `pickpocketloot` int(10) unsigned NOT NULL default ‘0′,
    `skinloot` int(10) unsigned NOT NULL default ‘0′,
    `resistance1` int(10) unsigned NOT NULL default ‘0′,
    `resistance2` int(10) unsigned NOT NULL default ‘0′,
    `resistance3` int(10) unsigned NOT NULL default ‘0′,
    `resistance4` int(10) unsigned NOT NULL default ‘0′,
    `resistance5` int(10) unsigned NOT NULL default ‘0′,
    `resistance6` int(10) unsigned NOT NULL default ‘0′,
    `spell1` int(11) unsigned NOT NULL default ‘0′,
    `spell2` int(11) unsigned NOT NULL default ‘0′,
    `spell3` int(11) unsigned NOT NULL default ‘0′,
    `spell4` int(11) unsigned NOT NULL default ‘0′,
    `mingold` int(30) unsigned NOT NULL default ‘0′,
    `maxgold` int(30) unsigned NOT NULL default ‘0′,
    `AIName` varchar(128) NOT NULL default ”,
    `MovementType` tinyint(3) unsigned NOT NULL default ‘0′,
    `InhabitType` tinyint(1) unsigned NOT NULL default ‘3′,
    `RacialLeader` tinyint(1) unsigned NOT NULL default ‘0′,
    `RegenHealth` tinyint(1) unsigned NOT NULL default ‘1′,
    `equipment_id` int(11) unsigned NOT NULL default ‘0′,
    `mechanic_immune_mask` int(11) NOT NULL default ‘0′,
    `ScriptName` varchar(128) NOT NULL default ”,
    PRIMARY KEY (`entry`)
    ) ENGINE=MyISAM DEFAULT CHARSET=utf8 ROW_FORMAT=FIXED COMMENT=’Creature System’;

    /*Table structure for table `npc_vendor` */

    DROP TABLE IF EXISTS `npc_vendor`;

    CREATE TABLE `npc_vendor` (
    `entry` int(11) unsigned NOT NULL default ‘0′,
    `item` int(11) unsigned NOT NULL default ‘0′,
    `maxcount` int(11) unsigned NOT NULL default ‘0′,
    `incrtime` int(11) unsigned NOT NULL default ‘0′,
    PRIMARY KEY (`entry`,`item`)
    ) ENGINE=MyISAM DEFAULT CHARSET=utf8 ROW_FORMAT=FIXED COMMENT=’Npc System’;

    Link to this comment Reply to this comment

    
    
25. 

    Omas said Mar 30, 2008 at 8:44 pm

    

    Hey im gettin an error tryign to install the custom vendors:

    ERROR 1136 (21S01) at line 32: Column count doesn’t match value count at row 1

    Could you help out reaper?

    Link to this comment Reply to this comment

    
    
26. 

    informative said Mar 30, 2008 at 12:38 pm

    

    @Shinzon: In MY personal opinion, anyone who seriously wishes to NOT keep a separate copy of Warcraft for private servers and expects the private servers to instantly patch every Tuesday that Wow patches, they REALLY should just play retail Wow. Thats what it is designed to be, perfect every time for people who don’t want to ever have to bother with and know how anything works.

    There is no logical way nor fancy illogical way to code a fix to the random unknown changes that might occur in the client application WOW.EXE therefore there needs to be a way to let people know when they are using the wrong version of WOW.EXE for the compiled version of mangosd.exe. This has already been made extremely simple and works as it should. If you really want to magically make all of the wow.exe 2.4.0 people be allowed to connect to the mangosd.exe for 2.3.3 then you CAN already do that by just changing the number in your CONF files. It’s probably going to give weird results if not on this release then on some future one and people will wind up more upset than if it had not been done liek that because it will at some point corrupt their characters or items or drop them out with crashes at random OR whatever. Right? No dis intended really but this same thing keeps getting asked in five flavors of gimme a break.

    @Jordan: On the question of renaming Vendors. If you look at this meeeage linked above where I inserted code for a full level 40 armor vendor. You can see it only includes three inserts into 3 tables. This is all the data required for a fully working vendor. The third insert statement has the name in this case it was “Raid Max” and you cuold change it by editing this table to change his name. Always ermember to stop and relaunch mangosd.exe when you change these sort of things because they are all preloaded and stored in memory. Say that would be a nice idea if there were some way to code a refresh in mangos so we didn;t have to boot everyone to refresh these items and vendors from the database. Hmmm.

    http://www.reaper-x.com/2008/03/23/reaper-mangos-5472-easy-wow-private-server-for-world-of-warcraft-233/#comment-88563

    Link to this comment Reply to this comment

    
    
27. 

    mannblack said Mar 30, 2008 at 12:26 pm

    

    Reaper awesome site and instructions. Just one question if you could update the instructions to include the instructions for scriptdev (297) I have all the SQL files; however, when i follow your link to scriptdev.com I can not create a new account on their forums as their captcha authentication is broken and can not create a new account to view the instructions.
    Thx in advance

    Link to this comment Reply to this comment

    
    
28. 

    Shinzon said Mar 30, 2008 at 9:37 am

    

    Reaper-X: First, I love your server I think this latest release is phenominal and very stable.

    I have a possibly a stupid question (given my limited knowledge of C++), but is there someway that ManGos might be able to be configured so that it reads from the DB for the client version? That way we can just change the DB table anytime blizzard releases one of these patches and we don’t have to worry about recompiling the whole application (or having to bother you asking for a recompile)?

    Link to this comment Reply to this comment

    
    
29. 

    Jordan said Mar 30, 2008 at 8:06 am

    

    Hey awesome job on this!
    but could you tell me how to change the name and subname of the custom vendors you put it. i tried doing it in the sql, that didnt work. and you disabled the commands for .name and .subname. so i dont know what to do.
    and could you maybe make a tutorial on how to make custom portals, that would be great! thanks.

    Link to this comment Reply to this comment

    
    
30. 

    moses said Mar 30, 2008 at 6:56 am

    

    stumped, can get to char creation screen, make a char. no one shows up. mangos says cannot access characters.character. sigh, tarax_lore@hotmail.com questions and help would be appreciated. ill come back and post solution if i get it, get help getting it

    Link to this comment Reply to this comment

    
    
31. 

    Jack said Mar 30, 2008 at 5:12 am

    

    It doesn’t work for me. I use no-ip as a DNS server and I set the Mangos to that. My WoW realmlist is set to that and everything is as it should be. Yet still it says, unable to connect.

    Link to this comment Reply to this comment

    
    
32. 

    bakaslayer said Mar 30, 2008 at 3:41 am

    

    @ Squall thanx

    Link to this comment Reply to this comment

    
    
33. 

    SGT Samuel E. McClard II said Mar 30, 2008 at 3:35 am

    

    From FOB Stryker, Iraq, THANK YOU FOR THE UPDATE.

    Link to this comment Reply to this comment

    
    
34. 

    informative said Mar 30, 2008 at 3:32 am

    

    @Martin: I would read my message at top of this thread and try those things.

    http://www.reaper-x.com/2008/03/23/reaper-mangos-5472-easy-wow-private-server-for-world-of-warcraft-233/#comment-89023

    Link to this comment Reply to this comment

    
    
35. 

    informative said Mar 30, 2008 at 3:29 am

    

    @Russel: There are thousands of quests. You can monitor the Mangos boards silvermoon and others for occasional fixes to bugged quests. The amazing thing is MOST of them work. Haven’t tried the escort quests yet are they still all broken too? Probably.

    @Hanns: Yes your Mangos personal playing version of Wow should be at version 2.3.3 and you should launch with the Wow.exe not the launcher.exe so it never tries to patch itself until you want it patched. Expecting people who work for free to write a hot fast update every Tuesday so we don’t have to keep separate copies of our RETAIL WOW and Mangos Wow is highly optimistic and very unlikely.

    Link to this comment Reply to this comment

    
    
36. 

    merijn said Mar 30, 2008 at 2:27 am

    

    u can if ur on 2.3.3 only use wow.exe in ur folder and erase patchlist XXXXX in your realmlist

    Link to this comment Reply to this comment

    
    
37. 

    Hanns said Mar 30, 2008 at 1:19 am

    

    I’m curious to know how this works in relation to the latest 2.4 patch just released by Blizzard. Is it possible to set up / install a SECOND copy of WoW that is only patched through 2.3.3? If this IS the case, I’ve been reading where people keep getting messages in the WoW client forcing them to upgrade to 2.4… how can this be disabled? Thanks for any feedback you can offer!!

    Link to this comment Reply to this comment

    
    
38. 

    Russell said Mar 29, 2008 at 10:28 pm

    

    I just want to let Reaper know that I found a broken quest in this release. Nat’s Bargain in Tidefury says Item not found when you try to accept the quest.

    Link to this comment Reply to this comment

    
    
39. 

    Derek said Mar 29, 2008 at 10:13 pm

    

    When I start Mangosd.exe, I get a problem with the locales_** files. It says they’re empty.

    Also, when I’m doing quests (such as “The Sun Gate” or any escorts), events necessary to complete the quest never happen.

    Are the two problems related? How can I fix them?

    -Derek

    Link to this comment Reply to this comment

    
    
40. 

    Todd said Mar 29, 2008 at 9:22 pm

    

    Do you think you (or anyone) could make a private server where everyone get GM powers? I can’t install all of the programs you’ve listed… It would be greatly appreciated! Or could you please make me a server? I know, it’s stupid of me to ask. Thanks for the guide!

    Link to this comment Reply to this comment

    
    
41. 

    Squall said Mar 29, 2008 at 5:20 pm

    

    @bakaslayer
    About UDB its easier to find what doesn’t work
    …:P
    About scriptdev2 u can find right here http://www.scriptdev2.com/index.php/topic,922.0.html

    Link to this comment Reply to this comment

    
    
42. 

    Martin said Mar 29, 2008 at 3:30 pm

    

    Hi

    I have tried to upgrade from your latest release and tried a fresh install but at a certain point at the installation ReaperMangos just stops.

    Please wait a while to import the datebase
    press a button

    Then it stops at the following line:

    LOCK TABLES ‘creature’ WRITE
    —————————-

    —————————-
    /*!40000 ALTER TABLE ‘creature” DISABLE KEYS */

    When I wait for 6 minutes and then it shows a lot of numbers which end with 1200,100,0,1)

    I know it is supposed to do that but after that it just stops.

    With previous upgrades it did not take this long.

    This happens at both databases.
    What is there to do?

    Link to this comment Reply to this comment

    
    
43. 

    bakaslayer said Mar 29, 2008 at 2:57 pm

    

    thanx for another great release,is there anywhere where you can find a list of what works and dosnt work in the udb and what script dev actually currenty has scripted,as far as i can tell you have to read endless forums ?

    Link to this comment Reply to this comment

    
    
44. 

    Kruge99 said Mar 29, 2008 at 12:04 am

    

    and now it seems that Mangos.exe is crashing when I exit the program and keeps writing out a massive log file until I press CTRL+C…

    Revision: 5472
Date 28:3:2008. Time 9:45
//=====================================================
*** Hardware ***
Processor: Intel(R) Pentium(R) 4 CPU 1.70GHz
Number Of Processors: 1
Physical Memory: 490224 KB (Available: 162608 KB)
Commit Charge Limit: 1148412 KB

    *** Operation System ***
    Microsoft Windows XP Professional Service Pack 2 (Version 5.1, Build 2600)

    //=====================================================
    Exception code: C0000005 ACCESS_VIOLATION
    Fault address: 004F922B 01:000F822B C:\darkhelm\mangosd.exe

    Registers:
    EAX:15B06F5C
    EBX:00000000
    ECX:0FE7D770
    EDX:0B033F00
    ESI:15B06F50
    EDI:15B06F50
    CS:EIP:001B:004F922B
    SS:ESP:0023:0012FEC0 EBP:15B05EE8
    DS:0023 ES:0023 FS:003B GS:0000
    Flags:00010202

    Call stack:
Address Frame Function SourceFile
004F922B 00000000 ?ChangeMembersGroup@Group@@QAEXPAVPlayer@@ABE@Z+29CB
147D7D88 00000000 0000:00000000
15B05EE8 00000000 0000:00000000
0CDE8530 00000000 0000:00000000

    Got any clues anyone?

    Regards,
    Kruge99.

    Link to this comment Reply to this comment

    
    
45. 

    Freze said Mar 28, 2008 at 7:40 pm

    

    @Franken
    Good point :-D

    Link to this comment Reply to this comment

    
    
46. 

    hellchief said Mar 28, 2008 at 10:52 am

    

    hey reaper please or anybody know how to make custom portals

    Link to this comment Reply to this comment

    
    
47. 

    Kruge99 said Mar 28, 2008 at 10:09 am

    

    Hi, first of all, Thank you Reaper-x for making this awsome package. now for the strangeness. Is anyone else seeing this error upon startup? (Mangos keeps working – but the message is there for a reason – yes?)

    2008-03-27 22:18:51 quest_start_scripts :
2008-03-27 22:18:51 ERROR:Table `quest_start_scripts` has quest (ID: 2755) in SCRIPT_COMMAND_QUEST_EXPLORED in `datalong` for script id 2755, but quest not have flag QUEST_MANGOS_FLAGS_EXPLORATION_OR_EVENT in quest flags. Script command or quest flags wrong. Quest modified to require objective.

    I don’t see anyone reporting it yet. I only noticed it since I tried using log level 3 and enable log colours in the mangos.conf file otherwise I don’t think this message appears. Thanks.

    Regards,
    Kruge99.

    Link to this comment Reply to this comment

    
    
48. 

    Craigus said Mar 28, 2008 at 7:28 am

    

    Read your mangos.conf file and right at the end you will be able to setup your auctionbot manualy if you know your account and character id’s

    Cheers

    Link to this comment Reply to this comment

    
    
49. 

    Lemon said Mar 28, 2008 at 5:49 am

    

    uh nvm i got that to work also :P

    Link to this comment Reply to this comment

    
    
50. 

    Lemon said Mar 28, 2008 at 5:37 am

    

    nvm, i switched database anyway….well now i got a new problem, how do i get the auction house bot to work, i’ve put in the GUID and all that but when i log in there’s nothing in the auction house?

    Link to this comment Reply to this comment

    
    

Trackbacks/Pingbacks

Leave a response Click here to cancel reply.

Please read our comment policy | XHTML: You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Name (Required)

Mail (Required, Will not be displayed to public)

Website (Optional, leave blank if have none)

Comment