PCSX2 0.9.4 (the one and only PS2 emulator i’ve tested and works) has been released yesterday (based from my local time). In fact i just tested two games (Suikoden V, Metal Gear Solid) on this new pcsx2 release and it seems there’s some improvement from the previous version (though i think my current pc specs is still not enough to run games normally on pcsx2). And btw … i’m using Athlon64 X2 5200+ with 3GB PC5300 DDR2 RAM, and GeForce 8600GT
But as a side note, i haven’t tried to play around with all of the new settings yet, other than enabling the Multi Threaded GS Mode and Dual Core mode on the cpu setting
The first one is Suikoden V, i get around 20 to 30 FPS at the Intro part and between 25 to 30 while on ship at the beginning (most of the time it just sits between 25 to 30)


The next game i test is the Metal Gear Solid 3 because i saw on the announcement that PCSX2 0.9.4 support MGS3. And although i get quite good fps at the beginning until the menu appear (more than 35 FPS), unfortunately i can get only around 10 – 18 FPS while in game though there’s an increase if i disabled FSAA and bilinear filtering … at the starting point in the jungle)


So i guess that if you’re using a more powerful pc with a high end vga card (especially if you’re using SLI) … i think that you can get a quite good fps … and probably you can play your ps2 games using this :)
Related Links :
Leave a response
I have 9.4 and I need the bios for it and was wondering I am using 9.2 bios rigt now and my copy of KOF XI is lagging lack crazy I was just wondering if the 9.2 bios are the reason the game is lagging my I please have a copy of the 9.4 bios, thanks reaper
ok woot i have fixed it :P if anyone gets the same error as a did open up pcsx2 and click config > configure and at the bottem left corner click bios directory and select the folder ur bios is in
hey i have the bios there is 24 files in there i have rom1 and scph1000 i have hered theyer names on other sites the bios in in C:\Program Files\Pcsx2_0.9.4\bios all the bios files are in there thay are extracted and i have tryed bios from difrent places but evry time i get “unable to locate /bios, pcsx2 can’t run without that” error plz plz help me my email is alakon@hotmail.co.uk
May I please have the bios as well for PCSX2 0.9.4. My email is LollerskateDJ@gmail.com
Thank you very much.
can i have bios for pcsx2 0.9.4 my email id is seb_166@hotmail.com
Hi, could you please send me the PCSX2 BIOS file please, my email is awab4000@googlemail.com
Cheers
sir Reaper or anyone, could you’ll please send me the bios? MUCH appreciated, thank you
my email, shadowrem@hotmail.com
Mr. Reaper…can u post how to use pcsx2 0.9.4 here?thx a lot
sry it s pomete@centrum.sk :) i can t edited it sry for double posting
hi please can u give me too?i want play narutimate accel 2
pls i need bios for 0.9.4
my e-mail=>pomete@centrum.sk
thx more
everybody asking for a BIOS…
poor Mr. Reaper…
thought he got bored…LOL…
if anybody want the BIOS file…
just e-mail me here…
t01774s@yahoo.com
(just for helping MR. Reaper)
e-mail me…cause i never wanna e-mail you first
thx a lot…
man i love this so much
Hey please can you put the link or instructions where to download a bios for pcsx2 0.9.4 or send me to mail anarcky01@hotmail.com
Please. Tnx
Hi everybody, I know the following has been repeated like a zillion times on this site, but PLEASE….can i have a copy of bios for PCSX2 0.9.4 too???? Thank you so much…. email: mikefx@gmail.com
I can i please get a copy of the bios please
email to maxpower201@yahoo.com
thx good sir
Greetings
I was wondering on how to get the bios files to work, everytime I try it says failed to load bios, and, is it my bios that’s faulty?
Please send me a mail if you can help at; alxs_tri@hotmail.com
Thanks in advance,
Alexander.
but remember dude…
there’s no such of perfect emulatot today…
so why don’t you just buy the real console…
i have three versions of bios…
US…EUROPE…and JAPAN
Hey Reaper or Siegelink,
Could you please send me a copy of the PCSX2 0.9.4 bios. I would appriciate it. BTW, nice job for whomever wrote the GNU code on this thing, it looks great and I can’t wait to use it.
Thanks agian,
Another One
thom_kirk@yahoo.com
Hello Reaper-X
If it’s not too much trouble, could you please e-mail the PS2 bios to me? I apologize if it’s an inconvenience. Thank you for your time.
Bo
bobo42789@gmail.com
Hello Reaper-X
cool_n…just upgrade your machine dude…
Hi there. I have one question. Why does the emu every time i want to play it restarts? I have the bios and everything, but it is not working.. :( I would be very pleased if you could help me… :D
thanks
Soryy i forgott to write my mail
hmdf_evil@yahoo.com
Hi Dear
I Have The Full Version if The Program With Lots of Plugins and etc.
But My latest bios is : its SCPH-70004V V12 i
think its old (EUR V2.0 14-6-2004). And My Machine is :
Asus P5B Deluxe
Core2 Duo e6750 2.6 1066
2G Ram OCZ 800
XFX 8600 GT ZalMan 680mhz core
But Still I Have Problem While Playing MGS3 Its Too Slow and with the best configuration Fps is above 10-20. if i Leave it to default configs fps will go above 10.
Could You Please help me ! Realy Thanks.
If you Have Any Newer Bios Please Send me !ag@in tnx.
Hey guys.
Couldsombudy send me a bios for 0.9.4?
I would be werry hapy.
Send it on pentek.antal@freemail.hu
Hello Sir Reaper,
I want to ask a question,
I have:Pentium D 925 processor[EM64]
3.0 GHz processor,
945 GZ motherboard,
512 MB DDR2 Ram[533 MHz].
Onboard Graphics with Pixel Shader 2.0.
Using windows Pro XP SP1 x64 and x86.
Using latest PCSX2 version.
I m playing Resident Evil 4,
it is running good but some time it runs very slow and the sounds r also crashing and not coming smooth. The FPS in RE-4 is about 20-25 since I cannot tell the exact value because i play in full screen.
Kindly tell me how to improve the speed of my PCSX2, One more thing is that can we see the FPS in full Screen or not if yes plz tell me.
Thanks bye bye take care … Have a good Day.
Guys……remember this…..
The BIOS are illegal to download…its Sony Electronics copyrights…
so…if you want to have it…just dump it from the real console…
PS2 emulators at this time do not play most games and if they do…its a unplayable speeds. Just buy the freaking real PS2 Console…guys!
it’s cheap…in my homeland…
just pay for about $198,50 or Rp.1.800.000 your problem is done…piece a cake…
could you please send me the bios, Thanks
Um, reaper-X, looks like you’ve been helping a lot. XD I wanted to play KH2 last time but since it’s still ver 0.9.2 I couldn’t get it to work properly, but it works slowly though. Now that the 0.9.4 is out, i’d like to try again. But i lost my bios =x and i forgot where i downloaded it last time that has a working BIOS for KH2.
I had Japan 2000, Europe 2001 and 2004, USA 2002 and 2004 BIOSes. I suspect it’s the USA 2006 that works with KH2? I am not entirely sure but can you please send me the BIOS that you think might work? my email is basketmansyu_z@hotmail.com
Just to be sure, maybe you can include your configuration that works?
I’ll update you again if it works or not, thanks a lot in advance =)
ROM0 – Main PS2 BIOS file [4.00 MB (4,194,304 bytes)] <—- Su…you have this file?
coz your problem same as mine when the first time i ran the emu…check the bios files…
n btw…i can play RE 4 with my emu…
but sometimes the game gets lag…(fps’s down)
but it works…
Su…
what your machine specs?
hye there..
can u give me the bios for 0.9.4?
i really need it..
thx in advance bro!
email it to me..> hackerz_kronickels@yahoo.com
can someone please send these 4 file to me , please?
ROM0 – Main PS2 BIOS file [4.00 MB (4,194,304 bytes)]
ROM1 – Language / DVD Player Related [512 KB (524,288 bytes)]
ROM2 – Language Specific (Chinese Characters?) [512 KB (524,288 bytes)]
EROM – DVD Video Player [3.00 MB (3,145,728 bytes)]
my email is jsbar002@gmail.com
Tomz,
I’ve try Resident Evil 4. But still cannot run because patches not found.
Why hah?
Btw, where is ur location?
Yet another person asking for a bios…
zero.2004@hotmail.com
I had a bios for 0.9.2, but never figured out where to put it. Could you tell me what files i need and where?
to su…
just try this game :
- metal slug 4, 5
- Resident Evil 4, CV : X
- Guitar Hero 2
- Winning Eleven 10
- Dragon Ball Z
Thats works with mine…
so if you still have the problem…
that’s mean your game not playable
ohh… can you please send me the PS2 Bios too… its kinda hard to find it though.. here’s my email add… thanks! lanzweirdo@yahoo.com
Hi all,
Now i’m trying to run the game using bios japan. There is no rom error anymore. But still cannot run because patches not found.
Till now i failed to run any ps games using PCSX2 v0.9.4.
Hope all of u here can help.
to su…
maybe your game not playable…
to akshay…
just upgrade your PC dude…
with my machine…
AMD X2 3600+
CPU Speed 2,0 ghz
2 gb DDR II (both actived)
GForce 8800 GTX
still slow to play the game…(for some games)
i am akshay from india my pc configuration is amd athlon 3000+,756mb of ddr ram, nvidia geforce 6200 256 mb,my pcx2 is 9.4 it dont work well on my pc it slow and missing some part when i play low end game like street fighter ex3 please send me a supporting bios new version please and mail me how to work pcx2 good
Hi Reaper,
I try to run my Digimon World Data Squad using pcsx2 0.9.4 but got some error. These are the error message:
-help to see arguments
PCSX2 v0.9.4 save ver: 7a30000f
EE pc offset: 0×2a8, PSX pc offset: 0×208
x86Init:
CPU vender name = AuthenticAMD
FamilyID = 1
x86Family = AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53
CPU speed = 1.678 Ghz
x86PType = Standard OEM
x86Flags = 178bfbff
x86EFlags = ebd3fbff
Features:
Detected MMX
Detected SSE
Detected SSE2
Detected SSE3
Extented AMD Features:
Detected MMX2
Detected 3DNOW
Detected 3DNOW2
F1 – save state
(Shift +) F2 – cycle states
F3 – load state
Bios Version 2.0
**************
rom1 NOT FOUND
**************
**************
rom2 NOT FOUND
**************
**************
erom NOT FOUND
**************
GIF reset
NTSC
* CDVD Disk Open: 1 tracks (1 to 1):
* * Track 1: Data (Mode 2) (707472 sectors)
* Disk Type: PS2 DVD.
creating zerogs
ZeroGS: Failed to create hardware device, creating software.
ZeroGS: Failed to create software device, switching to reference rasterizer.
Hope that u can help me to solve these problem. Thanks.
Hey reaper ive done everything correctly,but
when i run dragon ball z budokai tenkaichi 3.iso
through virtual dvd rom, nothing happens.
the screen goes blank and nothing appears.
Im using pcsx2 0.9.2r2
hi, can you send mi bios for pcsx2 0.9.4 ? tnx, my e-mail is bigmazzy@gmail.com
sorry lupa kasih alamat email
r23y@yahoo.com
Can u send me the latest bios for PCSX2 0.9.4
Thx u
can i have a copy of bios for PCSX2 0.9.4 plz send at my email miyul_08@hotmail.com
hey, could i get an updated Bios as well? for Pcsx2 0.9.4 would rule, e-mail is arcticwolf_0@hotmail.com Thanks
Meh BTW my email is planetbobb212000@yahoo.com Thx again :P
Heya guys, Could someone possibly send me an updated Bios for Pcsx2 0.9.4 Plz :) I have a really old one from 2004. Thank You in advance :D